说明研究项目TOPOFLANK
CALL FOR PROPOSAL
If your company would like to join this research project, please contact the project coordinator info (at) (暂不可见)
State of the art
Bevel gears and spiroid gears are manufactured and measured with same brand equipment (only two manufacturers in US and Europen Union and one in Russia), this means a monopolistic market position of these companies and high prices for complete manufacturing and measuring solution. A possible alternative is to measure gear topography on a multipurpose 3D CMM (Coordinate Measuring Machine) and generate correction data with a specific software. This method is slow and point-to-point.
Specific Innovation objectives: promote us of GMM instead of CMM
1. Objective of this project is to develop an 'independent' software module for measurement on standard gear measuring machine (GMM) diameter 500 mm, support distance 1000 mm. GMM are more compact, provide continous measurement, are faster and more accurate than 3D CMMs, are specifically developed for gears, and could be used directly in the production floor.
2. Develop an independent and universal software module for correction of machine parameters, both for hobbing and grinding technology, for different brands of machines.
3. Facilitate use of GMM in production floor instead of 3D measuring machines in calibration room.
Market impact and benefits
The main impact and benefit on the market will be the possibility to correct parameters on different production machines, independently from brand, thus allowing more competition among hobbing and grinding machine manufacturers in Europe.
Patent and exploitation of results
The partners have an agreement referring to the exploitation of the project outcomes.
Specific benefits for project team partners
Feanor and B
Feanor will increase knowledge about topography tooth analysis, which can be used for further measuring machine development and cooperation with gear machine tool manufacturers.
C will be able to correct machine parameters on different type of machines (brands) and different manufacturing technologies, will shift gear control to the workshop from the calibration room, thus reducing lead time, improve time-to-market, save space in manufacturing plant and use a compact and fast GMM instead of a large and slow multipurpose measuring machine.
声明：本网站所收集的部分公开资料来源于互联网，转载的目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。本站部分作品是由网友自主投稿和发布、编辑整理上传，对此类作品本站仅提供交流平台，不为其版权负责。如果您发现网站上所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并按国家标准支付稿酬或立即删除内容，以保证您的权益！联系电话：010-58612588 或 Email:editor@mmsonline.com.cn。
- 暂无反馈
