Omron releases PLC-Based CJ position controllers
March 10, 2009 - Position Controllers from Omron Electronics use a high-speed motion network to provide high precision control of 2, 4 and 16 axes to meet the growing need for fast throughput with reduced waste. The position controllers pair efficiently with Omron's GN-Series servo drives and G-Series motors, and are compatible with a range of programmable controller platforms for a scalable solution.
Designed for Omron's CJ and CS PLC platforms, the CJ position controllers can be paired with the micro CP1H controller for 2- and 4-axis standalone applications on a small machine or combined with CJ1, CJ2 or CS1 controllers for high-speed, high I/O count applications used on a full production line. The motion network reduces the total cost of ownership by simplifying operation, reducing wiring, offering centralized setup and single point access monitoring, and lowering the upfront hardware and software costs.
The position controllers store parameters in the module, not the CPU, to ensure fast network access without affecting the scan cycle and maintaining high throughput. The motion control bus enables individual GN Servo drives (with Motion Network capabilities) to link to the Position Controller using a single cable (2-core shielded twisted pair cable) in a daisy-chain configuration rather than the more costly direct wiring of a separate controller connection for each drive. This minimizes wiring, simplifies troubleshooting and allows easy system architecture expansion to include additional axes.
Both the controller and individual servo drives are programmed using Omron’s CX-One automation software suite which saves time and also ensures simple integration within the system. Not sold piecemeal in application modules, but as one value-priced package, Omron’s CX-One contains applications to configure and program all PLCs, Motion controllers, HMIs, Temperature controllers and Field bus networks. Extensive simulation capabilities and support for all five IEC 61131-3 programming languages are included in the standard CX-One suite.
Omron offers the new Position Controllers with motion network interface in 2-, 4- and 16-axis modules for the CJ and CS controller platforms. They provide a solution for simply automating applications in packaging, assembly, material handling and manufacturing operations where quick, precise, cost-effective positioning is required.
Designed for Omron's CJ and CS PLC platforms, the CJ position controllers can be paired with the micro CP1H controller for 2- and 4-axis standalone applications on a small machine or combined with CJ1, CJ2 or CS1 controllers for high-speed, high I/O count applications used on a full production line. The motion network reduces the total cost of ownership by simplifying operation, reducing wiring, offering centralized setup and single point access monitoring, and lowering the upfront hardware and software costs.
The position controllers store parameters in the module, not the CPU, to ensure fast network access without affecting the scan cycle and maintaining high throughput. The motion control bus enables individual GN Servo drives (with Motion Network capabilities) to link to the Position Controller using a single cable (2-core shielded twisted pair cable) in a daisy-chain configuration rather than the more costly direct wiring of a separate controller connection for each drive. This minimizes wiring, simplifies troubleshooting and allows easy system architecture expansion to include additional axes.
Both the controller and individual servo drives are programmed using Omron’s CX-One automation software suite which saves time and also ensures simple integration within the system. Not sold piecemeal in application modules, but as one value-priced package, Omron’s CX-One contains applications to configure and program all PLCs, Motion controllers, HMIs, Temperature controllers and Field bus networks. Extensive simulation capabilities and support for all five IEC 61131-3 programming languages are included in the standard CX-One suite.
Omron offers the new Position Controllers with motion network interface in 2-, 4- and 16-axis modules for the CJ and CS controller platforms. They provide a solution for simply automating applications in packaging, assembly, material handling and manufacturing operations where quick, precise, cost-effective positioning is required.
声明：本网站所收集的部分公开资料来源于互联网，转载的目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。本站部分作品是由网友自主投稿和发布、编辑整理上传，对此类作品本站仅提供交流平台，不为其版权负责。如果您发现网站上所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并按国家标准支付稿酬或立即删除内容，以保证您的权益！联系电话：010-58612588 或 Email:editor@mmsonline.com.cn。
网友评论
匿名:
最新反馈
- 暂无反馈
无须注册，轻松沟通
